Introduction to the process of transformer radiator 1.Radiators should be Fabricated /Shot blasted as per drawings
2. Radiators should be Leak proof, and offer test report.
3.Pre Despatch inspection will be done by our quality inspectors
4. Radiators Panels should duly painted with rust proof red oxide paint thickness minimum 40 microns on outside surface and Celerol Varnish coated on inside surface
5., Radiators Panels should hot dip galvanised thickness minimum 60 microns on outside surface and celerol Varnish coated on inside surface.
6. Radiators to be pressure tested.
7. Radiators should be packed on wooden pallet for safe loading / unloading
8. Sea worthy packing to avoid any transit damagesCustomized size range (mm):
We also have radiator assembly lines of various sizes:
Length: 600-4500
Width: 280-535
 Thickness according to customer requirements

The raw material can be iron or stainless steel.
You can choose surface treatments such as hot-dip galvanizing, spraying, or painting.
Anti corrosion grade: C3-C5M